Impression Materials
Impression Material Accessories Technique
SnapShot!
Tray
TM
Separate alignment
sticks from each
other.
Assemble the cross,
making sure the
horizontal stick is
snapped all the way
down.
The hole of one alignment
stick is oblong and wi ll
only fi t on one end of the
other stick. This makes
assembly goof-proof
Assembled align-
ment sticks.
The assembled sticks look
like this...
Fill both sides of
tray with adhesive
and polymer.
For best results, apply
tray adhesive fi rst. Then
fi ll the tray with polymer,
taking care to fi ll the
retention tracks.
Fill the alignment
stick area with
polymer.
Fill this area with polymer
to hold the alignment
sticks. Afterward, you
will remove the alignment
sticks and the remain-
ing hole will form a tight
guide when the lab rein-
serts the sticks.
Insert assembled
cross into polymer
retaining area on
handle and locate
facial midlines.
After inserting the loaded
tray into mouth, ask the
patient to bite in centric
and relax the lips. Im-
mediately insert the cross
into the hole in handle and
locate the facial midlines.
Once located, seat the cross
completely and hold it there until
polymer is fi rm and wait for fi nal
set. Hint: use the pupils of the
eyes as a guide for the horizontal
midline and the bridge of the
nose and philtrum as the vertical.
Remove the sticks.
Remove the sticks and send
them along to the lab. After
pouring up the casts, the
sticks will be re-inserted
securely into the hole in the
tray handle thus allowing
the lab tech to mark the
facial midlines on the casts.
1234a
4b
56
43
Call 800/827-7940 or visit danvillematerials.com
Comments to this Manuals