5-12 CONVERTER SYSTEM
Drive Belt
Drive Belt Inspection
•
Measure the width [A] of the belt.
If any measurements exceed the service limit, replace the
belt.
Belt Width
Standard: 30.3 mm (1.19 in.)
Service Limit: 28.8 mm (1.13 in.)
•
Check the belt for wear, cracks, breaks or peeling.
If necessary, replace the belt with a new one.
Belt [A]
Crack [B]
Broken [C]
NOTE
○
Whenever the belt is replaced, inspect the drive and the
driven pulleys.
Comments to this Manuals