California Air Tools 3010 Service Manual Page 78

  • Download
  • Add to my manuals
  • Print
  • Page
    / 368
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 77
3-8 COOLING SYSTEM
Coolant
Coolant Filling
Tighten the drain plugs.
Torque - Coolant Drain Plugs (Cylinder): 17 N·m (1.7 kgf·m,
12 ft·lb)
Remove:
Radiator Cap
Air Bleeder Bolts [A]
Pour the coolant slowly so that the air in the engine and
radiator can escape.
NOTE
Pour in the coolant slowly so that the air in the engine
and radiator can escape.
CAUTION
Soft or distilled water must be used with antifreeze
(see Specifications in this chapter) in the cooling
system.
If hard water is used in the system, it causes scale
accumulation in the water passages, considerably
reducing the efficiency of the cooling system.
Water and Coolant Mixture Ratio (Recommended)
Soft Water
:
50%
Coolant
:
50%
Freezing Point
:
–35°C (–31°F)
Total Amount
:
4.3 L (4.5 US qt)
NOTE
Choose a suitable m ixture ratio by referring to the
coolant manufacture’s directions.
When the coolant begins to flow out the air bleeder bolt
holes, tighten the air bleeder bolts.
Fill the cooling system up to the filler neck [A] in the radi-
ator cap fitting with coolant.
Install the radiator cap.
Fill the reservoir tank up to the F (Full) mark with coolant.
Page view 77
1 2 ... 73 74 75 76 77 78 79 80 81 82 83 ... 367 368

Comments to this Manuals

No comments