9-20 TRANSMISSION
2WD/4WD Shift Mechanism
2WD/4WD Shift Cable Adjustment
•
Put the shift lever [A] in the 2WD position.
•
Install the 2WD/4WD shift cable [A] to the shift shaft lever
[B] and cable bracket [C].
•
Put the shift lever [A] in the 4WD position.
•
Turn the shift shaft lever [A] counterclockwise until the
lever is stopped by engaging the shifter with the drive
bevel gear shaft.
•
Screw in the upper adjuster nut [B] by hand until the inner
cable [C] has no slack while holding the shift lever in the
4WD position.
•
Tighten the lower adjuster nut [D] securely.
Comments to this Manuals