FRAME 15-11
Front and Rear Bars
Cargo Bed Latch Position Inspection
(KAF620-E1/F1/G1, E2/F2/G2 Models)
•
Hang the hook [A] of each cargo bed latch on the cargo
bed [B] to check that the angle of latch lever [C] ranges
30 degrees [D] as shown in the figure.
If the lever angles rest within the specified range, latch
the cargo bed with the hooks.
If the lever angles rest out of the specified range, adjust
the latch positions.
Cargo B ed Latch Position Adjustment
(KAF620-E1/F1/G1, E2/F2/G2 Models)
•
Loosen the mounting bolts [E] initially.
•
Reposition the latches to obtain the specified angle range.
•
Tighten the bolts to latch the cargo bed with the hooks
securely.
Cargo Bed Latch Position Inspection
(KAF620-E3/F3/G3/H1 Models
∼
)
•
Cargo bed must be latched securely on the cargo bed
hooks [B] without rattling.
Latch [A]
If there is rattling or not snug enough, adjust the latch
positions.
Cargo B ed Latch Position Adjustment
(KAF620-E3/F3/G3 Model
∼
)
•
Release the latch and loosen the mounting bolts [C].
•
Reposition the latch to the suitable place by sliding within
the ellipse bolt holes.
•
Retighten the mounting bolts.
NOTE
○
Adjustment must be made on both sides.
Comments to this Manuals