CONVERTER SYSTEM 5-21
Driven Pulley
If the splines [A] are damaged or worn, replace them.
If the ramps [A] or the wear shoes [B] are damaged or
worn, replace the ramp or the shoes.
If the wear shoe contact area width [A] is greater than the
service limit, replace the shoe [B].
Wear Shoe Width
Service Limit: 16.3 mm (0.64 in.)
If the spring is damaged, replace the spring.
Spring Free Length [A]
Standard: 112.6 mm (4 .4 3 in.)
If the tabs on the spring are misaligned or the spring coils
are distorted, replace the spring.
Bushing Installation
•
Press the movable s heave bushings [A] into the movable
sheave [B] with a suitable driver until the end of the bush-
ingisevenwiththeend[C]ofthehole.
Comments to this Manuals