9-24 TRANSMISSION
Differential Gears and Shift Mechanism
Differential S hift Mechanism Installation
•
Apply grease:
Shift Shaft O-ring
•
Install the shift shaft lever [A] to the shift arm [B] as shown.
To rque - Shift Shaft Stop Bolt: 7.8 N·m (0.8 kgf·m, 69 in·lb)
Differential S hift Mechanism In spection
•
Visually inspect:
Splines on Drive Shaft [A]
Splines on Shifter [B]
Dogs on Shifter
Shifter G roove
•
Visually inspect:
Shift Arm Pin [A]
Dogs on Differential Gear Housing [B]
If they are damaged or worn excessively, replace them.
Shift Arm Pin Diameter [A]
Standard: 8.4 ∼ 8.6 mm (0.331 ∼ 0.339 in.)
Service Limit: 8.3 mm (0.327 in.)
Shifter Groove Width [B]
Standard: 9.0 ∼ 9.1 mm (0.354 ∼ 0.358 in.)
Service Limit: 9.2 mm (0.362 in.)
Differential Gear Removal
•
Remove:
Transmission Case (split)
Differential Gear Assembly [A]
Comments to this Manuals