TRANSMISSION 9-17
Hi/Low Gears and Shift Mechanism
Hi/Low Shift Cable Installation
•
See Transmission and Hi/Low Shift Cables Installation.
Hi/Low Shift Cable Inspection
•
With the cable disconnected at both ends, the cable
should move freely within the cable housing.
If the cable movement is not free, if the cable is frayed, or
if the housing is kinked, replace the cable.
Hi/Low Gear and Shift Mechanism Removal
•
Remove:
Bevel Gear Case (see Final Drive chapter)
Hi/Low Shift Shaft Lever [A]
2WD/4WD Shift Cable Lower End [B]
•
Remove:
Hi/Low Gear Case Bolts [A]
Hi/Low Gear Case [B]
•
Remove:
Washer [A]
High Gear [B]
Shifter [C]
Reduction Gear [D]
Comments to this Manuals