12-18 BRAKES
Brake Panel Assemblies
•
Grease (Amoco Rykon Premium Grease No. 2 EP
Green):
Brake Panel Seating Surface
•
Apply a non-permanent locking agent:
Brake Panel Mounting Bolts
•
Apply brake fluid:
Brake Pipe Nipple Threads
•
Tighten:
Torque - Wheel Cylinder Mounting Bolts: 11 N·m (1.1 kgf·m,
95 in·lb)
Wheel Cylinder Mounting Nuts: 7.8 N·m (0.8
kgf·m, 69 in·lb)
Brake Panel Mounting Bolts: 44 N·m (4.5 kgf·m,
33 ft·lb)
Brake Pipe Nipple: 18 N·m (1.8 kgf·m, 13 ft·lb)
•
Grease [A]:
Brake Panel and Brake Shoe Contact Points
Wheel Cylinder Piston Ends
Brake Shoe Anchor Ends
•
Grease (rear brake only) [B]:
Shoe Clearance Adjuster Pivots
Shoe Clearance Adjuster and Shoe Contact Points
•
Bleed the brake line after drum installation.
•
Check the brake system to be sure there is adequate
braking power. Also be s ure there is no b rake drag, or
fluid leakage.
WARNING
Do not attempt to drive the vehicle until a complete
brake pedal motion is obtained by pumping the
brake pedal until the brake shoes contact the drum
operating the shoe clearance adjuster until brake
shoe to brake drum contact is made. The brake will
not function on the first application of the pedal if
this is not done.
•
Adjust:
Parking Brake Lever Travel Adjustment (see Parking
Brake Lever Travel Adjustment)
Comments to this Manuals