6-8 CONVERTER SYSTEM
Air Cleaner
Air Cleaner Housin g Removal
•
Remove the air ducts [A].
•
Remove:
Bracket Bolts [B], Washers, Collars and Nuts
Air Cleaner Housing [C]
•
After removing the housing, stuff pieces of lint-free, clean
cloth into the torque converter cover duct to keep dirt out
of the torque converter.
CAUTION
If dirt gets into the torque converter, excessive wear
and loss of driving power may result.
Air Clean er Housing Installation
•
Install:
Air Cleaner Housing [A]
Bracket Bolt [B]
Washer [C]
Damper [D] (The shorter side faces outward.)
Collar [E]
Nut [F]
Air Ducts [G]
Clamps [H]
•
Tighten the clamp so that the range [I] does not enter in
the area [J].
Air Cleaner Element Removal
•
Remove:
Wingbolts [A]
Cap [B]
Comments to this Manuals