BRAKES 13-17
Brake Panel Assemblies
(Rear Brake Panel)
•
Remove:
Rear Brake Drum (see Brake Drum Removal)
Vent Hose [A]
Grommet [B] of Parking Brake Lever Linkage
Brake Pipe Nipple [C] (Unscrew)
Front [D]
•
Immediately wipe up any brake fluid that spills.
CAUTION
Brake fluid quickly ruins painted surfaces; any
spilled fluid should be completely wiped up imme-
diately.
•
Remove the brake shoe springs [A].
•
While pushing the shoe hold-down spring [B], turn the pin
[C] 90° and remove the shoes [D] individually.
NOTE
○
Wrap the brake shoes with a clean cloth to protect the
linings from grease or dirt.
○
To prevent the rear pin [E] from dropping into the rear axle
bracket, tape the pin onto the brake panel.
•
Remove the collar [F] on the rear brake panel.
Front [G]
•
Remove the following for rear brake panel removal.
Cotter Pin [A]
Joint Pin [B]
Parking Brake Lever Linkage [C]
•
Remove:
Brake Panel Mounting Bolts [A]
Rear Brake Panel [B]
Comments to this Manuals