California Air Tools 3010 Service Manual Page 207

  • Download
  • Add to my manuals
  • Print
  • Page
    / 506
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 206
CRANKSHAFT/CRANKCASE 9-17
Camshaft
Camshaft Inspection
Measure the overall height [A] of each cam.
If any cam has worn past the service limit, replace the
camshaft.
Cam Height
Standard:
Inlet
30.065 30.135 mm (1.1837 1.1864 in.)
Exhaust
30.065 30.135 mm (1.1837 1.1864 in.)
Service Limit:
Inlet
29.965 mm (1.1797 in.)
Exhaust
29.965 mm (1.1797 in.)
Measure the diameter of the camshaft journals.
If any journals has worn past the service limit, replace the
camshaft.
Camshaft Journal Diameter
Standard:
Right Side [A]
35.959 35.975 mm
(1.4157 1.4163 in.)
Center [B]
35.910 35.955 mm
(1.4138 1.4155 in.)
Left Side [C]
35.910 35.955 mm
(1.4138 1.4155 in.)
Service Limit:
Right Side [A] 35.89 mm (1.413 in.)
Center [B] 35.84 mm (1.411 in .)
Left Side [C] 35.84 mm (1.411 in.)
Measure the camshaft runout.
If the measurement exceeds the service limit, replace the
camshaft.
Camshaft Runout
Service Limit: 0.03 m m (0.0012 in.)
Page view 206
1 2 ... 202 203 204 205 206 207 208 209 210 211 212 ... 505 506

Comments to this Manuals

No comments