14-8 SUSPENSION
Struts and Rear Shock Absorbers
•
Install:
Dust Cover [A]
Upper Spring Seat [B]
○
Fit the spring end to the bulge [C] in the dust cover and
upper spring seat.
•
Apply grease to the upper and lower side on the following
parts, and install them.
Dust Seal [A]
Thrust Washer [B]
○
Face the projection on the thrust washer downward.
•
Install:
Holder [A]
Large Washer [B]
Small Washer [C]
Locknut [D]
○
Push down the holder, and tighten the locknut.
Torque - Strut Locknuts: 49 N·m (5.0 kgf·m, 36 ft·lb)
Comments to this Manuals