6-24 CONVERTER SYSTEM
Driven Pulley
•
Remove:
Wear Shoe Mounting Screws [A]
Wear Shoes [B]
Driven Pulley Inspection
If the sheave surfaces [A] appear damaged, replace the
sheaves.
•
Replace any sheave which has uneven wear on the belt
contacting surface.
Straight Edge [B]
If the guide bushings [A] are damaged or worn, replace
the movable sheave.
Sheave Bushing Inside Diameter
Standard: 39.655 ∼ 39.965 mm (1.561 ∼ 1.573 in.)
Service Limit: 40 mm (1.57 in.)
If the splines [A] of the fixed sheave and ramp are dam-
aged or worn, replace them.
Comments to this Manuals