10-14 TRANSMISSION
Transmissio n and Shift Mechanism
Transmission and Hi/Low Shift C ables Installation
•
Remove one side of the spring [A] from the shift shaft lever
assembly.
•
Put the shift lever [A] in the “L” (LOW) position.
•
Using the shift shaft lever [A] temporarily set the shift arm
[B] in forward or reverse position as shown in the figure.
•
Put the differential shift lever [A] in “LOCK” position.
•
Turn the hi/low shift shaft lever [A] clockwise while turning
the drive shafts (wheels) until the lever engages low gear.
Comments to this Manuals