6-18 CONVERTER SYSTEM
Drive Pulley
If the cover bushing is damaged or worn, replace the drive
pulley c over.
Cover Bushing Inside Diameter [A]
Standard: 27.655 ∼ 27.955 mm (1.089 ∼ 1.101 in.)
Service Li mit: 27.99 mm (1 .102 in.)
If the s heave bushing is damaged or worn, replace it.
Sheave Bushing Inside Diameter [A]
Standard: 38.055 ∼ 38.155 mm (1.498 ∼ 1.502 in.)
Service Li mit: 38.19 mm (1 .504 in.)
If the spider shoes [A] are damaged, replace them.
•
Check the spider shoe side clearance (see Spider Shoe
Side Clearance Adjustment).
If the ramp weights [A] are damaged or worn, replace
them.
If the pins [B] are damaged or worn, replace them.
If the rollers [A] are damaged or worn, replace the spider
[B].
If the washers [C] are damaged or worn, replace the spi-
der.
Comments to this Manuals