TRANSMISSION 10-21
Hi/Low Gears and Shift Mechanism
Hi/Low Shift Cable Installation
•
Refer to the Transmission and Hi/Low Shift Cables Instal-
lation.
Hi/Low Shift Cable Inspection
•
With the cable disconnected at both ends, the cable
should move freely w ithin the cable housing.
If the cable movement is not free, if the cable is frayed, or
if the housing is kinked, replace the cable.
Hi/Low Gear and Sh ift Mechanism Remo val
•
Remove:
Bevel Gear Case (see Bevel Gear Case Removal in the
Final Drive chapter)
Hi/Low Shift Shaft Lever [A]
2WD/4WD Shift Cable Lower End [B]
Cable Bracket [C]
•
Remove:
Hi/Low Gear Case Bolts [A]
Hi/Low Gear Case [B]
•
Remove:
Washer [A]
High Gear [B]
Washer
Shifter [C]
Reduction Gear [D]
Comments to this Manuals